![]() ![]() Suggested network virtualization profiles. For details, see Generate and analyze HAR files. HAR file generation is currently only supported in enterprise clouds. To use the generateHarFileparameter, first install the certificate and configure the device using Perfecto Automation. Indicates if a HTTP Archive (HAR) file should be generated for each test to analyze the traffic of the virtual network. For example, to block http, define port number 80. Network packet block, to specific destinations, defined by domain name, IP address, and IP range destinations in IP Prefix (Slash) notation. However, if the previous packet was not lost, then the packet loss value would be 75% * 5%, which equals 3.75%. In other words, the current packet value is correlated to the previous packet value.įor example, if the correlation is defined to be 25%, the packet loss is 5%, and the previous packet was lost, then the updated packet loss value (for the current packet) would be 75% * 5% + 25%, which equals 28.75%. Network packet value correlation, affecting the Latency, Corruption, Reordering and Duplication.įor Latency, Corruption, Reordering and Duplication, the current packet n value will be correlated by this % to previous packet n-1 value. Used alongside the Latency parameter.įor example, if the latency is defined to be 100 ms and the jitter is 10 ms, this causes the added delay to be 100ms - 10ms. Random latency variation the actual latency between latency +- jitter. A reasonable packet duplication value should not exceed 3%. Moreover, the packets sent immediately will arrive earlier than the packets that were delayed by the defined latency value, essentially creating a packet reordering.Ī reasonable packet reordering value should not exceed 10%. ![]() The percentage of network packets sent immediately without any delay. A reasonable packet loss value should not exceed 5% Limitation on the allowed upload network bandwidth from the device. Limitation on the allowed download network bandwidth into the device. A reasonable packet loss value should not exceed 5%. Latency applied on packets in the Network. The following is the list of parameters supported: The virtual network can be configured using the same parameters supported by the Perfecto Network virtualization start command. Use the networkVirtualization clause in your configuration file or adle file to define the parameters to define the characteristics of the emulated network. The Gradle plugin supports configuration of a virtual network environment to execute the Espresso/Robotium tests. PacquireDeviceRetryNumber= 5 -PacquireDeviceRetryInterval= 45 Network virtualization parameters For example: Samsung, HTC.ĭevice model - for example: Galaxy S III, HTC Oneĭevice network, For example AT&T, Verizon The device description as defined in the Perfecto Lab.įor mobile devices manufacturer of the model. Then click More details to view network information. To retrieve the value for network, select a device and click the information icon to view device details in the right pane.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |